Connection-systems for
lay-flat ductings and spiral ductings |
|
 |
|
| 1. |
Joint made from PVC-profile, with a
galvanized quick release lock, open model,
3 mm galvanized traction ropes, only for
ducting with normal endrings 9,5/13,5 mm,
that means up to max. 1200 mm ducting-
diameter. |
 |
2.
|
Joint-HP-VK; made of PVC-coated polyester-
Fabric with a galvanized screw-bolt; closed
model; 4 mm galvanized traction ropes; tension-
length approx. 210 mm, mainly for ductings
with strengthened endrings 15/18 mm diameter,
that means from 1400 mm ducting diameter,
but it can also be used for ductings with normal
endrings. |
|
The endrings
of the two ducts to be connected, should be fitted together
so that they are parallel to each other. The HP-clamp, which
has already been positioned over one duct, should only then
be secured. A greater safety and better sealing will be achieved. |
|
|
3.
|
Zipper-Connection; suitable for all diameters;
the overlap on the inside seals the zipper in the ducting argely through
the internal pressure.
|
|
|
Cuff ending ducts can be lengthened
only with the help of metal-cuffs. The connection on metal-cuffs is
only possible with suitable couplings 1. or 2.
|
|
